Product Details
Thick Rubberized Liquid by Flex Seal®. Seals out air, water and moisture and is mildew, chemical and UV resistant. Non-hazardous, non-flammable and safe around plants and animals.
Notes
- Avoid contact with eyes and skin
- Gloves and safety glasses are recommended
- KEEP OUT OF REACH OF CHILDREN
Features
- Thick Rubberized Liquid You Can Brush, Roll, Dip and Pour
- Thick liquid that dries to a flexible watertight rubberized coating
- Creates a flexible rubber barrier that blocks out air water and moisture
- Non-Toxic Non-flammable no harmful vapors UV chemical and mildew resist
- Seals and protects from the elements and extreme temperatures
- Concrete and asphalt repair
- Foundation repair
- Prevent basement seepage
- Weatherize and seal out moisture
- Home and roof repair
- RV and motorhome weatherizing and repair
- Pools and pool equipment
- Outdoor ponds and bird baths and much more
Works on: Concrete, glass, brick, stucco, masonry, wood, copper, plastic, tile, fabrics, wires, vinyl, fiberglass, ceramic, porcelain, metal, aluminum, natural stones, foam, asphalt, EIFS, TPO, PVC, EPDM, CSPE, Hypalon polyurethanes and more.
Protective clothing is recommended prior to starting any projects, make sure the surface is clean, dry and free of grease, oil and dirt. You can either brush, roll, dip or pour Flex Seal Liquid directly onto surface.
Increase adhesion by etching surface with sand paper.
Allow each coat to dry completely (24 to 48 hours) before adding additional coats. Flex Seal Liquid fully cures in 48 hours.
Tips for Brushing/Rolling Applications.
Brush or roll Flex Seal Liquid using an even sweeping motion. Apply several even coats until the surface has been completely covered and ALL cracks and holes have been filled. Always brush or roll over a larger area than just where the leak occurred.
Tips for Dipping Applications
Dip object into Flex Seal Liquid, making a slight swirling motion. Once you feel the surface has been fully coated, remove and let any excess liquid drip back into the can. Hang or clip object in the same vertical position as it came out of the can and let dry.
Once fully cured, you will have a super strong, no slip, rubberized coating on the surface.
Tips for Pouring Applications
Pour Flex Seal Liquid directly on the surface, allowing gravity to take the liquid into cracks, holes, and/or other hard-to-reach areas.Continue to pour until the surface has been covered and all cracks and/or holes have been filled completely.
When pouring Flex Seal Liquid into an area of depth greater than ¼ inch, allow each ¼ inch layer to cure completely before pouring the next layer. Allow at least 48 hours for liquid to fully cure.
With many years of experience, Flex Seal® offers a variety of high-quality solutions, including seals, pastes, tapes, seal liquids, glues, and more to help you get the job done right. With its talented team of professionals, it strives to meet the highest customers’ demands, as well as the challenges of the modern world. The company offers the strongest waterproof tape that can instantly patch, bond, and seal virtually anything. It even works underwater! Investing in Flex Seal means getting the ultimate in quality, reliability, and safety.