Product Details
Eccotemp® - i12-Series 4.0 GPM Tankless Natural Gas Black Indoor Water Heater with Horizontal Ventilation byEccotemp®.With Ventilation Kit. Power Type: Natural Gas. Ventilation Type: Horizontal. This bundle includes the i12-NG Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Horizontal vent kit. The Eccotemp i12 4 Gallon Per Minute (GPM) Tankless Water Heater has a new revolutionary design, making it unlike any other Tankless Water Heater on the market today. The Eccotemp is perfect for vacation cabins, cottages, and smaller homes. This model features a sleek, black tempered glass front paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow.
Notes
- You may need to purchase a straight pipe piece with a backflow preventer to ensure that freezing air does not come back through the vent pipe
- Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING
- Failure to clean and descale your water heater quarterly can result in lime and sediment build up within the heater, which can void your warranty! Recommend using Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater
Specifications
| Applications: Cabins, Apartment/Townhome |
| Color: Black |
| Size: 17.00" x 39.00" x 11.00" |
| Energy factor: 79% |
| Flow Rate: 4.0 GPM |
| Hot water capacity range: 0.6 - 4.8 GPM |
| Installation: Indoor |
| Map Zone: Southern Region, Northern Region, Mid Region |
| Maximum/Minimum gas rate: 25,000 - 80,000 BTUs |
| Power Type: Natural Gas |
Includes
- 1 x Indoor Natural Gas Tankless Water Heater
- 1 x 3" Stainless Steel Horizontal Vent Kit
- 1 x 120-volt UL Listed Power Cord
- 1 x 2.5"-3" Stainless Steel Adapter
- 1 x Hardware Pack
- 1 x Instruction Manual
Features
- Activates only on demand and no pilot light needed, reducing energy consumption
- Easy to use LED display controls
- Safe electronic ignition system
- Uses standard 1/2" NPT water fittings
- 4 GPM flow capacity
- 2-Year Limited Warranty
- Built to ensure the finest levels of quality and value
- Developed to comply with rigorous quality standards
- Will help you bring along all the comforts of your home
- High quality at an affordable price
- Expertly made from premium materials
- Built to match your exact requirements
The Eccotemp i12-NG is also equipped with child locking technology. The Eccotemp i12-NG is a gas-powered, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. This model also offers a 35 to 40-degree Fahrenheit temperature rise when operating at a flow rate of 4 GPM and a 77-degree Fahrenheit temperature rise at 1.5 GPM. This bundle comes with a Horizontal Stainless Steel Vent Kit, ready to install and with its 120-volt UL listed power cord powering the internal exhaust fan and digital display. The Eccotemp i12 only pulls about 2 watts while idle and 1.07 Amps during operation, making it an ideal energy efficient appliance.
2.5 to 3" Stainless steel adapter
This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6".
Eccotemp Horizontal Vent Kit 3"
This 3" single walled Z-Flex Horizontal vent kit is for horizontal installations only. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also, remember a max vent run of 20' subtracting 4' for every 90 Degree elbow in the run.
(1) Termination Hood with backflow preventer
(1) 3" x 90 Degree Elbow
(1) 3" x 1' Pipe
(1) 3" Wall Thimble
(1) 3" Appliance Adapter
Made of AL-294C stainless steel. This is Category II/III and UL approved.
The Eccotemp i12 has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp i12 above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp i12 above 5000 feet is not recommended.
Eccotemp® was founded in 2004 as a family owned and operated manufacturer of energy-efficient products located outside of Charleston, in Summerville, SC. Eccotemp are proud to say Eccotemp still hold a strong belief in traditional family values, and that belief is largely why Eccotemp take customer satisfaction so seriously. Families all over the world trust Eccotemp to take care of them and Eccotemp do so with immense pride.