Eccotemp® FVI12-NGH - FVI12-Series 4.0 GPM Tankless Natural Gas White Indoor Tankless Water Heater Bundle with Horizontal Vent Kit

0 reviews|Item # mpn4644852408|Similar Products
$579.00
OUT OF STOCK - Unavailable until further notice
Authorized Dealer
Have a Question? Ask a Specialist
888.453.5141Live Chat

Product Details

Eccotemp® - FVI12-Series 4.0 GPM Tankless Natural Gas White Indoor Tankless Water Heater Bundle with Horizontal Vent Kit byEccotemp®.This bundle includes the tankless water heater, 2.5" to 3" stainless steel adapter, and the 3" horizontal vent kit. The Eccotemp is a fired, Indoor Tankless Water Heater designed for small to medium hot water production where you need more than one hot water application at the same time. This model is perfect for vacation cabins, cottages, and smaller homes. The Eccotemp offers a 45-degree Fahrenheit temperature rise when operating at 4 Gallons Per Minute maximum flow capacity and a 77-degree Fahrenheit temperature rise at 2.3 Gallons Per Minute. Included in the bundle is a Stainless Steel Vent Kit, ready to install.

Notes

  • You may need to purchase a straight pipe piece with a backflow preventer to ensure that freezing air does not come back through the vent pipe
  • Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING nor be used with a bilge pump
  • Failure to clean and descale your water heater quarterly can result in lime and sediment build up within the heater, which can void your warranty! Recommend using Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater

Specifications

Applications: Cabins, Apartment/Townhome
Color: White
Size: 17.00" x 39.00" x 11.00"
Energy factor: 79%
Flow Rate: 4.0 GPM
Installation: Indoor
Map Zone: Southern Region, Northern Region, Mid Region
Maximum / Minimum gas rate: 25,000 to 74,500 BTUs
Power Type: Natural Gas

Includes

  • 1 x 3" Stainless Steel Horizontal Vent Kit
  • 1 x 110-volt UL Listed Power Cord
  • 1 x 2.5"-3" Stainless Steel Adapter
  • 1 x Hardware Pack
  • 1 x Instruction Manual

Features

  • Sleek modern design
  • Digital temperature display
  • True 1/2" NPT water fittings
  • Manual water temperature controls
  • Natural Gas Powered
  • 4 GPM flow capacity
  • Power ventilation for safety, efficiency, and venting options
  • Tested-Safe Electronic ignition system
  • Fully independent gas and water controls
  • Precise temperature and water flow adjustment
  • Uses gas only when hot water is on
  • Requires standard household 120-volt electric outlet
  • UL listed electrical components
  • 2-Year Limited Warranty
  • Built to ensure the finest levels of quality and value
  • Developed to comply with rigorous quality standards
  • Will help you bring along all the comforts of your home
  • High quality at an affordable price
  • Expertly made from premium materials
  • Built to match your exact requirements

The Eccotemp 120-volt UL listed power cord powers the internal exhaust fan and digital display and only pulls about 2 watts idle and 1.07 Amps during operation, making it ideal when energy conservation is paramount.

2.5 to 3" Stainless steel adapter
This stainless steel adapter can be used with the Eccotemp FVI12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6".

Eccotemp Horizontal Ventilation kit 3"
This 3" single walled Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit. This vent kit is supplied with all the necessary components for a quick and seamless installation. It includes the following pieces:
(1) Termination Hood with Backflow Preventer
(1) 3" x 90 Degree Elbow
(1) 3" x 1' Pipe
(1) 3" Wall Thimble
(1) 3" Appliance Adapter
Made of AL-294C stainless steel. This is Category II/III and UL approved.
Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

The Eccotemp FVI12 has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp FVI12 above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp FVI12 above 5000 feet is not recommended.

Eccotemp® was founded in 2004 as a family owned and operated manufacturer of energy-efficient products located outside of Charleston, in Summerville, SC. Eccotemp are proud to say Eccotemp still hold a strong belief in traditional family values, and that belief is largely why Eccotemp take customer satisfaction so seriously. Families all over the world trust Eccotemp to take care of them and Eccotemp do so with immense pride.

Brand:
Part Number:
FVI12-NGH
UPC:
891876002546
Alternate MPN:
FVI12NGH

Reviews

(0)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Eccotemp® FVI12-NGH - FVI12-Series 4.0 GPM Tankless Natural Gas White Indoor Tankless Water Heater Bundle with Horizontal Vent Kit
/0

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
CAMPERiD FacebookCAMPERiD TwitterCAMPERiD YouTube ChannelCAMPERiD PinterestCAMPERiD Instagram
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor implied that any item sold by CAMPERiD.com is a product authorized by or in any way connected with any manufacturers displayed on this page.
CUSTOMER SERVICE
INFORMATION
CONTACTS