Product Details
Smart Battery Isolator by Cole Hersee®. For vehicles with two batteries, these devices electrically isolate the batteries to prevent the battery with the higher charge from draining into that with the lower charge. In addition, both batteries can be charged simultaneously from one source.
Specifications
| Voltage: 12 V |
| Amperage: 200 A |
| Disconnect Voltage: 12.7V after one minute at this level |
| Normal Input Voltage: 9V min, 16V max |
| Battery terminal torque: 50 in-lbs (5.78Nm) |
| EMI/RF: Per SAE J1455 & J1113 |
| Operating Temperature range: -40 to 85ºC |
| Shock &Thermal Shock: per SAE J1455 |
| Ingress Protection: IP66 per IEC, (high pressure wash resistant) |
| Humidity: to 90% RH |
| Vibration: 10-500Hz per SAE J1455 |
| Quiescent current: 5mA typical, 8mA max |
Features
- Smaller and lighter than traditional isolators
- There are no efficiency losses due to diodes
- It allows bi-directional charging from the alternator or from shore power
- It reduces the load on the charging system by not connecting the auxiliary battery until the primary battery is charged to 13.2V. This extends the life of expensive charging components
Cole Hersee® are a leading manufacturer of electromechanical, electronic and digital switches and connectors, designing dependable products for a broad range of vehicles. Since its founding in 1924, Cole Hersee has been a pioneer and leader in the development of heavy-duty electrical products for the vehicle industry, and has earned a reputation for quality and value. Cole Hersee collaborated on many basic industry standards and today is a preferred supplier of over 2,000 dependable vehicle products and accessories. Cole Hersee is ISO 9001:2008 certified.